標準號：ANSI/ASTM B240-2001
中文標準名稱：壓模鑄錠中鋅合金規范
英文標準名稱：Specification for Zinc Alloys in Ingot Form for Die Castings
標準類型：H40
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H40
國際標準分類號：77.150.60
適用范圍：This specification covers commercial zinc and zinc-aluminum (ZA) alloys in ingot form for remelting for the manufacture of pressure die castings and foundry castings as designated and specified in Table 1. Seven alloy compositions are specified, designated as follows: UNSA ASTMA Common Z33521 AG 40A Alloy 3 Z33522 AG 40B Alloy 7 Z35530 AC 41A Alloy 5 Z35540 AC 43A Alloy 2 Z35635 ZA-8 Z35630 ZA-12 Z35840 ZA-27 . Zinc alloys Z33521, Z33522, Z35530, and Z35540 are used primarily for remelting in the manufacture of pressure die castings. Zinc-aluminum alloys Z35635, Z35630, and Z35840 are used for remelting in the manufacture of both foundry and pressure die castings. Castings made from these ingots are specified in ASTM B86, Standard Specification for Zinc and Zinc-Aluminum Alloys for Foundry and Die Castings. The values stated in inch-pound units are to be regarded as standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Data Sheet for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.