標準號：ISO 230-10-2011
中文標準名稱：機床試驗規程.第10部分:數控機床探測系統測量性能的測定
英文標準名稱：Test code for machine tools - Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
標準類型：J50
發布日期：2011/5/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J50
國際標準分類號：25.080.01
引用標準：ISO 230-1;ISO 230-3-2007;ISO/TR 230-9;ISO 10360-5-2010
適用范圍：This part of ISO 230 specifies test procedures to evaluate the measuring performance of contacting probingsystems (used in a discrete-point probing mode) integrated with a numerically controlled machine tool.It does not include other types of probing systems, such as those used in scanning mode or non-contactingprobing systems. The evaluation of the performance of the machine tool, used as a coordinate measuringmachine (CMM), is outside the scope of this part of ISO 230. Such performance evaluation involvestraceability issues, is strongly influenced by machine tool geometric accuracy and can, in addition to themachine tool probing system tests specified in this part of ISO 230, be evaluated according to ISO 10360-2and ISO 10360-5.Numerically controlled machine tools can apply contacting probing systems in machining process applications,such as:- identification that the correct workpiece has been loaded before machining;- location and/or alignment of the workpiece;- measurement of the workpiece after machining, but whilst still on the machine;- measurement of the position and orientation of the machine tool rotary axes;- measurement and setting of the cutting tool (radius, length and offset of the tool);- detection of tool breakage.NOTE 1 This part of ISO 230 focuses on machining centres, but it is intended that other types of machines, forinstance turning and grinding centres, be included in a future revision of this part of ISO 230.NOTE 2 This part of ISO 230 does not include non-contacting type of probes (e.g. optical probes) or scanning probes,but it is intended that they be included in a future revision of this part of ISO 230.