標準號：IEC 60051-1-1997
中文標準名稱：直接作用模擬指示電測量?jī)x表及其附件 第1部分:定義和對所有部分通用的一般要求
英文標準名稱：Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
標準類型：N20
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：N20
國際標準分類號：01.040.17;17.220.20
適用范圍：This standard applies to direct acting indicating electrical measuring instruments having an analogue display, such as:- ammeters and voltmeters;- wattmeters and varmeters;- frequency meters of pointer and vibrating-reed types;- phasemeters, power-factor meters and synchroscopes;- ohmmeters, impedance meters and conductance meters;- multi-function instruments of the above types.It also applies to certain accessories used with these instruments, such as:- shunts;- series resistors and impedance elements.If other accessories are associated with instruments, this standard is applicable to the combination of the instrument and the accessory provided that the adjustments have been made for the combination.This standard also applies to a direct acting indicating electrical measuring instrument whose scale marks do not correspond directly to its electrical input quantity, provided that the relationship between them is known.This standard also applies to instruments and accessories having electronic devices in their measuring and/or auxiliary circuits.This standard does not apply to special purpose instruments which are covered by their own IEC standards.This standard does not apply to special purpose devices which are covered by their own IEC standards when they are used as accessories.This standard does not contain either requirements for protection against environmental conditions or the relevant tests. However, when necessary, and then only by agreement between the manufacturer and the user, tests to approximate the conditions of use may be selected from IEC 60068.This standard does not specify requirements concerning dimensions of instruments or accessories (for the former, see IEC 60473).