標準號：BS EN 50377-8-13-2010
中文標準名稱：光纖通信系統用連接器組和互連元件.產品規范.使用U類鈦合成材料套圈端接在IEC 60793-2-50 B1.1和B1.3類單模纖維上的LSH-APC單工元件
英文標準名稱：Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with titanium composite ferrule for category U
標準類型：M33
發布日期：2010/5/31 12:00:00
實施日期：2010/5/31 12:00:00
中國標準分類號：M33
國際標準分類號：33.180.20
適用范圍：1.1 Product definitionThis standard contains the initial, start of life dimensional, optical, mechanical and environmentalperformance requirements which a terminated and assembled singlemode resilient alignment sleeve LSHPCsimplex connector set (plug-adaptor-plug), adaptor and patchcord must meet in order for it to becategorised as an EN standard product.Since different variants and grades of performance are permitted, product marking details are given in 3.5.1.2 IntermateabilityAlthough all products conforming to the requirements of this standard will intermate, the resulting level ofrandom attenuation performance will only be ensured in accordance with Table 1. The intention is that thiswill be true irrespective of the manufacturing source(s) of the product.When intermating plug variants having different attenuation grades the resulting level of attenuation cannot be assured to be any better than the worst attenuation grade.The intermating of a grade C plug with a grade B plug will result in an uncertain level of randomattenuation performance.1.3 Operating environmentThe tests selected combined with the severities and durations are representative of a Category Uenvironment as defined in EN 61753-1.1.4 ReliabilityWhilst the anticipated service life expectancy of the product in this environment is 20 years, compliancewith this standard does not guarantee the reliability of the product. This should be predicted using arecognised reliability assessment programme.1.5 Quality assuranceCompliance with this standard does not guarantee the manufacturing consistency of the product. Thisshould be maintained using a recognised quality assurance programme.