標準號:SAE J 2711-2002
中文標準名稱:混合電動車輛和常規重型車輛的排放和燃料節約的測量的推薦實施規程
英文標準名稱:Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles
標準類型:T04
發布日期:2002/9/1 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:T04
國際標準分類號:13.040.50
引用標準:ASTM D 240-2002;ASTM D 4809-2000;SAE J 1634-1999;SAE J 1711-1999;SAE J 2263-1996;SAE J 2264-1995;2000-01-2011;2000-01-2955
適用范圍:This SAE Recommended Practice was established to provide an accurate, uniform and reproducible procedure for simulating use of heavy-duty hybrid- electric vehicles (HEVs) and conventional vehicles on dynamometers for the purpose of measuring emissions and fuel economy. Although the recommended practice can be applied using any driving cycle, the practice recommends three cycles: the Manhattan cycle, representing low-speed transit bus operation; the Orange County Transit Cycle, representing intermediate-speed bus operation; and the Urban Dynamometer Driving Schedule (UDDS) cycle representing high-speed operation for buses and tractor-trailers. This document does not specify which emissions constituents to measure (e.g., HC, CO, NOx, PM, CO 2 ), as that decision will depend on the objectives of the tester. While the recommended practice was developed specifically to address the issue of measuring fuel economy and emissions for hybrid-electric heavy-duty vehicles on a chassis dynamometer, the document can also be applied to chassis testing of other heavy- duty vehicles. This document builds upon SAE J1711, the light-duty HEV chassis recommended practice. As in SAE J1711, this document defines a hybrid vehicle as having both a rechargeable energy storage system (RESS) capable of releasing and capturing energy and an energy-generating device that converts consumable fuels into propulsion energy. RESS specifically included in the recommended practice are batteries, capacitors and flywheels, although other RESS can be evaluated utilizing the guidelines provided in the document. Further, the recommended practice provides a detailed description of state of charge (SOC) correction for charge-sustaining HEVs. This document also has a section which provides recommendations for calculating fuel economy and emissions for charge-depleting hybrid-electric vehicles. It should be noted that most heavy-duty vehicles addressed in this document would be powered by engines that are certified separately for emissions. The engine certification procedure appears in the Code of Federal Regulations, Title 40.
相關標準
《EN ISO 14184-1:2011》紡織品 甲醛的測定 第1部分:游離和水解的甲醛(水萃取法) EN ISO 14184-1:2011
《DIN 53160-2:2010》日用品色牢度測定-第2部分:耐人造汗水 DIN 53160-2:2010
《GB/T 9832-2007》毛絨、布制玩具 GB/T 9832-2007
《ISO 8124-1:2018+A1:2020+A2:2020》玩具安全-第1部分:安全方面相關的機械與物理性能 ISO 8124-1:2018+A1:2020+A2:2020 附錄B
《ISO 8124-1:2018+A1:2020+A2:2020》玩具安全-第1部分:安全方面相關的機械與物理性能 ISO 8124-1:2018+A1:2020+A2:2020 附錄A
《-16 CFR 1501 3》消費者安全委員會:美國聯邦法規-16 CFR 1501 3歲以下小孩使用的玩具和其它物品的小零件識別方法
《AS/NZS ISO 8124.1:2019+A1:2020+A2:2020》澳大利亞/新西蘭標準 玩具安全-第1部分:安全方面相關的機械與物理性能 AS/NZS ISO 8124.1:2019+A1:2020+A2:2020 5.39
《ISO 8124-1:2018+A1:2020+A2:2020》玩具安全-第1部分:安全方面相關的機械與物理性能 ISO 8124-1:2018+A1:2020+A2:2020 5.39
《AS/NZS ISO 8124.1:2019+A1:2020+A2:2020》澳大利亞/新西蘭標準 玩具安全-第1部分:安全方面相關的機械與物理性能 AS/NZS ISO 8124.1:2019+A1:2020+A2:2020 4.17
《ISO 8124-1:2018+A1:2020+A2:2020》玩具安全-第1部分:安全方面相關的機械與物理性能 ISO 8124-1:2018+A1:2020+A2:2020 4.17
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;