標準號：UL 60730-2-11A-2002
中文標準名稱：家用和類似用途的自動電控制裝置.第2部分:能量調節器的特殊要求
英文標準名稱：UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators First Edition
標準類型：Y60
發布日期：2002/2/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Y60
國際標準分類號：97.120
適用范圍：This clause of Part 1 is replaced as follows1.1 In general，this part of International Standard IEC 60730 applies to ENERGY REGULATORS for use in，on，or in association with equipment for household and similar use，including ENERGY REGULATORS for heating，air conditioning and similar applications The equipment may use electricity，gas，oil，solid fuel，solarthermal energy，etc or a combination thereofThis standard applies to ENERGY REGULATORS using NTC or PTC THERMISTORS，additional requirements for whichare contained in Annex JThese ENERGY REGULATORS may be thermally，mechanically or elec[rically operated1.1.1 This Part 2 applies to the inherent safety．to the OPERATING VALUES．OPERATING TIMES and OPERATINGSEQUENCE where such are associated with equipment safety，and to the testing of automatic electricalENERGY REGULATOR devices used in，or in association with，household or similar equipmentThroughout this Part 2 the word”equipment“means”appliance and equipment”This Part 2 does not apply to automatic electrical ENERGY REGULATORS designed exclusively for industriaapplicationsThis Part 2 is also applicable to individual ENERGY REGULATORS utilized as part of a control system or ENERGYREGULATORS which a re mechanically integ ral with multi—functional controls having non—electrical outputsENERGY REGULATORS for equipment not intended for normal household use，but which nevertheless may beused by the public，such as equipment intended to be used by laymen in shops，in light industry and onfamls are within the scope of this standard1.1.2 This Part 2 applies to manual ENERGY REGULATORS when such are electrically and／or mechanicallyintegral with AUTOMATIC CONTROLSRequirements for manual switches not forming part of an automatic ENERGY REGULATOR are contained in IEC61058-11.2 This Part 2 applies to ENERGY REGULATORS with a RATED VOLTAGE not exceeding 660 V and with a RATEDCURRENT not exceeding 63 A1.3 This Part 2 applies also to ENERGY REGULATORS incorporating ELECTRONIC DEVICES．requirements for whichere contained in Annex H