標準號：IEC/PAS 62339-1 Edition 1.0-2003
中文標準名稱：表面安裝流體分配元件用模塊化元件接口.第1部分:彈性密封件
英文標準名稱：Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals
標準類型：J22
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J22
國際標準分類號：23.100.50;25.040.40
引用標準：ASME Y 14.5M;ISO 4288-1996
適用范圍：This standard applies to all types of surface-mount fluid distribution components with elastomeric sealingdevices used within process analyzer and sample-handling systems. This includes components such asvalves, filters, regulators, transducers, and controllers.The scope of this document is limited as follows:a) This document addresses only surface-mount fluid distribution components and proper sealingmethods. This document is limited to sealing methods using elastomeric material for the seals.b) The designs of the actual system components and the flow substrate are not specified in thisstandard. Any indication of mounting direction or other indexing is left to the manufacturer asrequired for its equipment.c) Users shall be aware that, based on the stream conditions of their processes, other technologies andcomponents may be readily available.d) This standard does not address the effects of various stream conditions on the technical functionalityof the component.e) This standard does not address maintenance concerns for the components.f) This standard does not refer to design issues pertaining to specific safety requirements. Theseissues shall be referenced to other standards, organizations, and recommended guidelines.g) International, national, and local codes, regulations, and laws shall be consulted to ensure that eachcomponent meets the user’s regulatory requirements.