標準號：BS EN 12629-8-2003
中文標準名稱：生產混凝土和硅酸鈣建筑產品用設備.安全.生產硅酸鈣(和混凝土)建筑產品用機器和設備
英文標準名稱：Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)
標準類型：Q92
發布日期：2003/7/16 12:00:00
實施日期：2003/7/16 12:00:00
中國標準分類號：Q92
國際標準分類號：91.220
適用范圍：1 This European Standard applies to hydraulic machines for the manufacture of bricks, blocks and elements of calcium-silicate (as illustrated in annexes A and B). NOTE Calcium-silicate can be replaced by concrete. 2 This European Standard deals with all significant hazards pertinent to these machines, when used as intended under the conditions foreseen by the manufacturer (see clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risk arising from significant hazards. 3 This European Standard applies to the machines from the point at which the mixture enters the machine (see point 1 at annex A, B) until the point where the green products are removed from the machine to the curing system (see point 2 of annex A, B). 4 This European standard does not cover those requirements for reducing hazards from mechanical, electrical, pneumatic, hydraulic or other equipment or machinery that are dealt with in standards for their common use (Type A, B1 and B2 standards). 5 This European Standard deals with the hazards other than noise hazards listed in clause 4 which can arise during the operation and maintenance, including the interfaces, of machines for the manufacture of constructional products from calcium-silicate, when carried out in accordance with the specifications given by the manufacturer or his authorised representative. NOTE 1 Amendment is under preparation to deal with noise, in particular for measures to reduce noise at source and a noise test code including noise declaration. NOTE 2 Interfaces between the machines for the manufacture of constructional products from calcium-silicate and others of the installation are dealt with in 7.2 of EN 12629-1:2000. This standard establishes safety requirements and/or methods of protection which apply to these machines. At this time, noise hazard and vibration hazard are considered as not significant for those machines. 6 The provisions stated in this standard assume that all operators have been adequately informed and trained. note:1) Until a noise test code (dealing with the measurement and declaration of noise emission values) specific to the machines covered by this part is available to complement the requirements of 5.7.2 and 7.4.2 of EN 12629-1:2000, it cannot be considered that noise hazards are covered.