標準號：ISO 8257-2-2001
中文標準名稱：塑料 聚甲基丙烯酸甲酯(PMMA)模塑和擠塑材料 第2部分:試樣的制備和性能的測定
英文標準名稱：Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
標準類型：G32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G32
國際標準分類號：83.080.20
引用標準：ISO 62-1999;ISO 75-2-1993;ISO 175-1999;ISO 178-1993;ISO 179-1993
適用范圍：1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring their properties. Any property listed in this part of ISO 8257 and referred to in combina-tion with ISO 8257-1 shall be determined by the method referred to in this part of ISO 8257. 2 No values are quoted for these properties. Those required for the designation of PMMA materials for moulding and extrusion are given in ISO 8257-1. Other properties shall be determined by the appropriate methods referred to in this part of ISO 8257. 3 The values determined in accordance with this part of ISO 8257 will not necessarily be identical to those ob-tained using specimens of different dimensions and/or prepared by different procedures. They may also be influ-enced by colorants and other additives. The values obtained for the properties of a moulding depend on the moulding compound, the shape of test specimen, the test method and the state of anisotropy. The last-mentioned depends on the gating and the moulding conditions, for example temperature, pressure or injection rate. Any subsequent treat-ment must also be considered, for example conditioning or annealing. 4 The thermal history and the internal stresses of the specimens may strongly influence thermal and mechanical properties and resistance to environmental stress cracking, but exert less effect on the electrical properties, which mainly depend on the chemical composition of the moulding compound.