標準號：BS ISO 13679-2003
中文標準名稱：石油和天然氣工業(yè).套管和管道連接的檢驗規(guī)程
英文標準名稱：Petroleum and natural gas industries - Procedures for testing casing and tubing connections
標準類型：E98
發(fā)布日期：2003/1/10 12:00:00
實施日期：2003/1/10 12:00:00
中國標準分類號：E98
國際標準分類號：75.180.10;75.200
適用范圍：This International Standard establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer's claimed test load envelope and limit loads. It categorizes test severity into four test classes. It describes a system of identification codes for connections. This International Standard does not provide the statistical basis for risk analysis. This International Standard addresses only three of the five distinct types of primary loads to which casing and tubing strings are subjected in wells: fluid pressure (internal and/or external), axial force (tension or compression), bending (buckling and/or wellbore deviation), as well as make-up torsion. It does not address rotation torsion and non-axisymetric (area, line or point contact) loads. This International Standard specifies tests to be performed to determine the galling tendency, sealing performance and structural integrity of casing and tubing connections. The words casing and tubing apply to the service application and not to the diameter of the pipe.