標準號:ISO 12130-1-2001
中文標準名稱:滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第1部分:斜墊止推軸承的計算
英文標準名稱:Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings
標準類型:J11
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:J11
國際標準分類號:21.100.10
適用范圍:The aim of ISO 12130 is to achieve designs of plain bearings that are reliable in operation by the application of a calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the thrust collar and plain bearing surfaces by a film of lubricant.
This part of ISO 12130 applies to plain thrust bearings with tilting-type sliding blocks (tilting pads), where a wedge-shaped lubrication clearance gap is automatically formed during operation. The ratio of width to length of one pad can be varied in the range B/L = 0,5 to 2.
The calculation method described in this part of ISO 12130 can be used for other gap shapes, e.g. parabolic lubrication clearance gaps, as well as for other types of sliding blocks, e.g. circular sliding blocks, when for these types the numerical solutions of Reynolds' differential equation are present. ISO 12130-2 gives only the characteristic values for the plane wedge-shaped gap; the values are therefore not applicable to tilting pads with axial support.
The calculation method serves for designing and optimizing plain thrust bearings e.g. for fans, gear units, pumps, turbines, electric machines, compressors and machine tools. It is limited to steady-state conditions, i.e. load and angular speed of all rotating parts are constant under continuous operating conditions.
This part of ISO 12130 is not applicable to heavily loaded tilting pad thrust bearings.
相關標準
《SAE J1756:2006》汽車內飾件霧化特性的測定 SAE J1756:2006
《GB/T 18942.1-2003》高聚物多孔彈性材料 壓縮應力應變特性的測定 第1部分:低密度材料 GB/T 18942.1-2003
《ISO 3386-1:1986》高聚物多孔彈性材料 壓縮應力應變特性測定 第1部分:低密度材料 ISO 3386-1:1986
《ISO 1798:2008》軟質泡沫聚合材料 拉伸強度和斷裂伸長率的測定 ISO 1798:2008
《ISO 8067:2018》高聚物多孔彈性材料-撕裂強度的測定 ISO 8067:2018
《BS EN ISO14362-3:2017》紡織品-從偶氮染料中分離出的特定芳族胺的測定方法-第3部分:可能釋放4-氨基偶氮苯的偶氮著色劑的檢測 BS EN ISO14362-3:2017
《DIN EN ISO14362-3:2017》紡織品-從偶氮染料中分離出的特定芳族胺的測定方法-第3部分:可能釋放4-氨基偶氮苯的偶氮著色劑的檢測 DIN EN ISO14362-3:2017
《ISO14362-3:2017》紡織品-從偶氮染料中分離出的特定芳族胺的測定方法-第3部分:可能釋放4-氨基偶氮苯的偶氮著色劑的檢測 ISO14362-3:2017
《BS EN ISO 3071:2020》紡織品:水萃取液pH值的測定 BS EN ISO 3071:2020
《DIN EN ISO 3071:2020》紡織品:水萃取液pH值的測定 DIN EN ISO 3071:2020
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;