標準號：BS EN 60320-1-2001+A1-2007
中文標準名稱：家用和類似用途設備耦合器.一般要求
英文標準名稱：Appliance couplers for household and similar general purposes -Part 1: General requirements
標準類型：K30
發布日期：2001/9/28 12:00:00
實施日期：2001/9/28 12:00:00
中國標準分類號：K30
國際標準分類號：29.120.30
引用標準：IEC 60050-151-1978;IEC 60068-2-32-1975;IEC/TR 60083-1997;IEC 60112-1979;IEC 60227;IEC 60245;IEC 60695-2-10-2000;IEC 60695-2-11-2000;IEC 60695-2-12-2000;IEC 60695-2-13-2000;IEC 60730;IEC 60999-1-1999;IEC 61058;IEC 61140-1997;ISO 286-1-1988;ISO 1101-1983;IS
適用范圍：This part of IEC 60320 is applicable to two-pole appliance couplers for a.c. only, with or withoutearthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding16 A, for household and similar general purposes and intended for the connection of a supplycord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply.NOTE 1 Appliance inlets integrated or incorporated in appliances or other equipment are within the scope of thisstandard. The dimensional and general requirements of this standard apply to such inlets, but certain tests may notbe relevant.NOTE 2 The requirements for connectors are based on the assumption that the temperature of the pins of thecorresponding appliance inlets does not exceed70 °C for connectors for cold conditions;120 °C for connectors for hot conditions;155 °C for connectors for very hot conditions.NOTE 3 Appliance couplers complying with this standard are suitable for use at ambient temperatures notnormally exceeding 25 °C, but occasionally reaching 35 °C.NOTE 4 Appliance couplers complying with the standard sheets in this standard are intended for the connection ofequipment having no special protection against moisture. If appliance couplers are used with equipment which maybe subject to spillage of liquid in normal use then protection against moisture is to be provided by the equipment.NOTE 5 Special constructions may be required– in locations where special conditions prevail, for example, as in ships, vehicles and the like;– in hazardous locations, for example, where explosions are liable to occur.