標準號：SAE AMS 3347C-2014
中文標準名稱：1200psi(8.27MPa)高模數硅酮橡膠.45-55
英文標準名稱：Rubber, Silicone 1200 Psi (8.27 Mpa), High Modulus 45-55
標準類型：G35
發布日期：2014/5/8 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G35
國際標準分類號：49.025.40
引用標準：ANSI/ASQ Z 1.4-2003;ASTM D 297-2013;ASTM D 395-2003;ASTM D 412-2006;ASTM D 471-2012;ASTM D 573-2004;ASTM D 624-2000;ASTM D 2137-2011;ASTM D 2240-2005;ASTM D 3182-2007;SAE AMS 2279;AMS2810
適用范圍：This specification covers a silicone rubber in the form of sheet, strip, tubing, extrusions and molded shapes. Primarily for parts required to operate or seal from -75 to +205 degrees C (-103 to +401 degrees F), compounded especially for high strength. Silicone elastomer is resistant to deterioration by weathering and by high-aniline-point-petroleum-base oils and remains flexible over the temperature range noted. These products are not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling.