標準號：SAE J 429-2014
中文標準名稱：外螺紋緊固件的機械和材料要求
英文標準名稱：Mechanical and Material Requirements for Externally Threaded Fasteners
標準類型：T31
發布日期：2014/5/7 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T31
國際標準分類號：21.060.10;21.060.20
引用標準：ASME B18.2.1-2012;ASME B18.18-2011;ASTM E 18-2014;ASTM F 606-2013;ASTM F 788/F 788M-2008;ASTM F 1470-2012;ASTM F 2328-2005;SAE J 403-2009;SAE J 404-2009;SAE J 409-1995;SAE J 411-1997;SAE J 417-1983;SAE J 995-2012;SAE J 1268-2010
適用范圍：This SAE Standard covers the mechanical and material requirements for inch-series steel bolts, screws, studs, screws for sems , and U-bolts in sizes to 1-1/2 in. inclusive. The term stud as referred to herein applies to a cylindrical rod of moderate length threaded on either one or both ends or throughout its entire length. It does not apply to headed, collared, or similar products which are more closely characterized by requirements shown herein for bolts. The mechanical properties included in Table 1 were compiled at an ambient temperature of approximately 20 °C (68 °F). These properties are valid within a temperature range which depends upon the material