標準號：SAE AMS 5529J-2012
中文標準名稱：標稱厚度為0.0015-0.050 in(0.038-1.27 mm)的沉淀硬化溶液熱處理和冷軋耐腐蝕合金鋼(17鉻,7.1鎳,1.1鋁)板材和帶材
英文標準名稱：Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 Inch (0.038 to 2.54 mm) Nominal Thickness
標準類型：V11
發布日期：2012/2/20 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.10
引用標準：ASTM A 370-2011;ASTM E 353-1993;ASTM E 384-2011;SAE AMS 2242;SAE AMS 2248;SAE AMS 2371;SAE AMS 2807-1991;SAE ARP 1110
適用范圍：This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.100 inch (0.038 to 2.54 mm) in nominal thickness. These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications. Strength of these cold-worked products will be impaired if parts require welding during fabrication. Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.