標準號：BS EN 60684-3-271-2011
中文標準名稱：軟絕緣套管.各種型號套管規范.阻燃,耐流體,收縮比率為2:1的熱縮彈性套管
英文標準名稱：Flexible insulating sleeving. Specifications for individual types of sleeving. Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
標準類型：K15
發布日期：2011/9/30 12:00:00
實施日期：2011/9/30 12:00:00
中國標準分類號：K15
國際標準分類號：29.035.20
引用標準：IEC 60684-1-2003;IEC 60684-2-1997;IEC 60757-1983;ISO 846-1997;ISO 1817-2005
適用范圍：This part of IEC 60684 gives the requirements for four types of heat-shrinkable, flame retarded,fluid resistant, elastomer sleevings, nominal shrink ratio of 2:1.Type A: standard wall thickness for use at temperatures up to 120 °CType B: thin wall thickness for use at temperatures up to 120 °CType C: standard wall thickness for use at temperatures up to 150 °CType D: thin wall thickness for use at temperatures up to 150 °CThese sleevings are normally supplied with internal diameters up to 102 mm for the standardwall thickness and up to 51 mm for the thin wall thickness. The standard colour is black.Sizes or colours other than those specifically listed in this standard may be available as customitems. These items are considered to comply with this standard if they comply with the propertyrequirements listed in Tables 1, 2, 3, 4, 5 and 6 except for dimensions and mass.Materials which conform to this specification meet established levels of performance. However,the selection of a material by a user for a specific application should be based on the actualrequirements necessary for adequate performance in that application and not based on thisspecification alone.