標準號：BS EN 14870-1-2011
中文標準名稱：石油和天然氣工業.管道運輸系統用感應管彎頭、配件和法蘭.感應管彎頭
英文標準名稱：Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Induction bends
標準類型：E98
發布日期：2011/7/31 12:00:00
實施日期：2011/7/31 12:00:00
中國標準分類號：E98
國際標準分類號：23.040.40;23.040.60;75.200
引用標準：EN ISO 148-1;EN ISO 6507;EN ISO 6508;EN ISO 6892;EN ISO 7438;EN ISO 7539-2;ISO 783;ISO 3183-2007;ISO 8501-1-2007;ISO 9303-1989;ISO 9305;ISO 9712;ISO 9764-1989;ISO 10124;ISO 10474;ISO 11496;ISO 12094;ISO 12095;ISO 80000-1-2009;ISO 13623;ISO 13663;ISO 13664
適用范圍：This International Standard specifies the technical delivery conditions for bends made by the inductionbending process for use in pipeline transportation systems for the petroleum and natural gas industries asdefined in ISO 13623.This International Standard is applicable to induction bends made from seamless and welded pipe ofunalloyed or low-alloy steels.NOTE These are typically C-Mn steels or low-alloy steels that are appropriate for the corresponding level and gradeof line pipe in accordance with ISO 3183.This International Standard specifies the requirements for the manufacture of two product specification levels(PSLs) of induction bend corresponding to product specification levels given for pipe in ISO 3183.This International Standard is not applicable to the selection of the induction bend product specification level.It is the responsibility of the purchaser to specify the PSL, based upon the intended use and designrequirements; see also ISO 3183:2007, Introduction.This International Standard is not applicable to pipeline bends made by other manufacturing processes.On-land supply systems used by the gas supply industry excluding gas infrastructure from the input of gas intothe on-shore transmission network up to the inlet connection of gas appliances are excluded from the scope ofthis standard.