標準號：ISO 28927-10-2011
中文標準名稱：手持便攜式電動工具.振動輻射的評價用試驗方法.第10部分:沖擊鉆,沖擊錘和沖擊壓碎機
英文標準名稱：Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
標準類型：K64
發布日期：2011/4/15 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：K64
國際標準分類號：13.160;25.140.10
引用標準：ISO 2787;ISO 5349;ISO 5391-2003;ISO 17066;ISO 20643-2005;EN 12096
適用范圍：This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at thehandles of hand-held power driven percussive machines with and without rotary action [portable rock drills,plug hole drills, rotary hammers, breakers (e.g. pavement breakers, concrete breakers or road breakers),riveting hammers, chipping hammers, pick hammers or similar]. It is a type-test procedure for establishing themagnitude of vibration in the gripping areas of a machine fitted with an inserted tool bit.This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven pneumatically or by othermeans, intended for making holes in hard materials, such as rock and concrete. It is also applicable tobreakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) andfor hammers intended to work in any direction to perform riveting or chiselling work. It is not applicable toimpact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack legtype rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but byan additional device).It is intended that the results be used to compare different models of the same type of machine.NOTE To avoid confusion with the terms “power tool” and “inserted tool”, “machine” is used hereinafter for the former.