標準號：BS DD CEN/TS 14567-2004
中文標準名稱：郵政服務.郵件的自動處理.地址塊定位器
英文標準名稱：Postal services - Automated processing of mail items - Address block locator
標準類型：M80
發布日期：2004/2/12 12:00:00
實施日期：2004/2/12 12:00:00
中國標準分類號：M80
國際標準分類號：03.240
適用范圍：This Technical Specification defines a set of physical marks called Address Block Locators (ABLs). ABLs aremarks, printed in the vicinity of addresses on postal items, that are intended to facilitate automatic recognition ofaddress location and processing of the addresses on mail sorting and video-coding equipment.The Technical Specification describes two families of ABLs which may be printed on all types of postal items,including letters, flats and parcels.In the first family, address block locators take the form of pictograms which bear no other information than being alandmark for the address block. One such pictogram is defined herein for use in association with the deliveryaddress block. It may be printed at the same time as the address or pre-printed on an envelope, an insert, or alabel, with the address being printed, on the same physical support, at a later stage.The second family covers address block locators which contain an encoded specification of the address block typeand location and which can also be used for encoding other data, not directly related to address block location.Such data may include addressee or postal item identifiers, routing data, non-delivery instructions, a return addressand references or other data which are relevant for either the mailer or the addressee. It may also include addresschecking data which may be used to verify correct interpretation of the printed address by the OCR system. In thisfamily, three types of ABL are defined: one based on a pattern of alphanumeric characters; one on a linear barcode and one based on two-dimensional symbologies. These locators can be applied to the delivery address blockand to forwarding or return address blocks. They will normally be printed within the same process as the addressitself.The Technical Specification is intended to be used by:? mailers, during the production of mail;? MLOCR and video-coding systems manufacturers, in the design of their systems;? postal operators, in the specification of requirements for mail presentation and for the acquisition of mailprocessing systems.Adherence to the Technical Specification is voluntary. However:? mailers should be aware that adoption of those aspects of the Technical Specification which are supported bytheir postal operator(s) should result in faster, more reliable, processing of their postal items, particularly wherethe addresses on these are printed on, or surrounded by, busy backgrounds;? suppliers should be aware that support for the Technical Specification should enhance the performance oftheir systems, increasing their attractiveness to postal operators;? postal operators should be aware that adoption of the Technical Specification, and promotion of its use bymailers, should result in faster, more reliable and more efficient processing and a reduction in video-codingvolumes.The set of marks defined as ABLs in this Technical Specification is not intended to be exhaustive. In particular,individual postal operators may develop systems which use other marks, including facing marks and digital postagemarks, to facilitate address block location. Where this is the case, it is recommended that such other marks besupported in addition to, rather than instead of, the ABLs defined herein.