標準號:ISO 20643-2005
中文標準名稱:機械振動.手持式和手導式機械.振動傳導評價原則
英文標準名稱:Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission
標準類型:J04
發布日期:1999/12/31 12:00:00
實施日期:1999/12/31 12:00:00
中國標準分類號:J04
國際標準分類號:13.160;25.140.01
適用范圍:This document provides the basis for the drafting of vibration test codes for hand-held and hand-guided power-driven machinery. It specifies the determination of hand-transmitted vibration emission in terms of frequency-weighted root-mean-square (r.m.s.) acceleration during type testing. For machines where vibration test codes do not exist, it may also be used for determination of emission values and contains sufficient guidance for designing an appropriate test.
NOTE Vibration test codes based on this document should define measuring procedures which provide controlled, repeatable and reproducible results which are, as far as possible, in agreement with the vibration values measured at the machine-hand contact surfaces under real working conditions and for which the uncertainties of measurement are quantified.
This document is applicable to hand-held power tools (e.g. chipping hammers, sanders), hand-guided powered machines (e.g. lawn mowers, single-axle tractors, vibratory rollers) and other types of powered machines fitted with handles, guiding beams or similar means of control. It is applicable to machinery of all power sources (electrical, hydraulic, pneumatic, internal combustion engine, etc.).
It does not apply to fixed machinery in which the vibration is transmitted to the hands of the user through the workpiece.
This document is not applicable to vibration transmitted from steering wheels or control levers of mobile machinery where the operator's position is on the machine, see EN 1032.
It is restricted to translational vibration measured in three orthogonal directions at the hand-machine interface.
This document should be applied with caution to machines producing single and repetitive shocks with a frequency of occurrence lower than 5 Hz. For such machines, it is not known whether frequency-weighted root-mean-square acceleration values are related to the risks to health and additional measurements may be required. When developing vibration test codes for such machines the information in CEN ISO/TS 15694 should be considered.
This document is not applicable to vibration test codes published before the date of publication of this document by CEN and, when used as test code, to hand-held and hand-guided machinery manufactured before that date.
This document does not present limits or recommended vibration values. It does not give any guidance or recommendations for determination of human exposure to vibration at the workplace. For such information, reference is made to EN ISO 5349-1 and EN ISO 5349-2.
相關標準
《ISO 16000-6:2011》室內空氣 第6部分:通過Tenax TA吸附劑、熱解吸以及使用質譜(MS)或質譜-火焰離子化檢測器(MS-FID)的氣相色譜主動取樣來測定室內 ISO 16000-6:2011 10
《ISO 16000-6:2011》室內空氣 第6部分:通過Tenax TA吸附劑、熱解吸以及使用質譜(MS)或質譜-火焰離子化檢測器(MS-FID)的氣相色譜主動取樣來測定室內空氣 ISO 16000-6:2011 9
《GB/T 38462-2020》紡織品 隔離衣用非織造布 GB/T 38462-2020
《GB/T 14233.1-2008》醫用輸液、輸血、注射器具檢驗方法 第1部分:化學分析方法 GB/T 14233.1-2008 9
《GB/T 1958-2017》產品幾何技術規范(GPS) 幾何公差 檢測與驗證 GB/T 1958-2017
《GB 38453-2019》防護服裝 隔熱服 GB 38453-2019
《GB 8368-2018》一次性使用輸液器 重力輸液式 GB 8368-2018
《GB 8368-2018》一次性使用輸液器 重力輸液式 GB 8368-2018
《GB/T 16175-2008》醫用有機硅材料生物學評價試驗方法 GB/T 16175-2008
《GB/T 16175-2008》醫用有機硅材料生物學評價試驗方法 GB/T 16175-2008
百檢網專注于為第三方檢測機構以及中小微企業搭建互聯網+檢測電商服務平臺,是一個創新模式的檢驗檢測服務網站。百檢網致力于為企業提供便捷、高效的檢測服務,簡化檢測流程,提升檢測服務效率,利用互聯網+檢測電商,為客戶提供多樣化選擇,從根本上降低檢測成本提升時間效率,打破行業壁壘,打造出行業創新的檢測平臺。
百檢能給您帶來哪些改變?
1、檢測行業全覆蓋,滿足不同的檢測;
2、實驗室全覆蓋,就近分配本地化檢測;
3、工程師一對一服務,讓檢測更精準;
4、免費初檢,初檢不收取檢測費用;
5、自助下單 快遞免費上門取樣;
6、周期短,費用低,服務周到;
7、擁有CMA、CNAS、CAL等權威資質;
8、檢測報告權威有效、中國通用;