標準號：BS EN 12629-6-2004+A1-2010
中文標準名稱：生產混凝土和硅酸鈣建筑產品用機械.安全性.生產預制加筋產品的固定和移動設備
英文標準名稱：Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
標準類型：Q92
發布日期：2005/8/2 12:00:00
實施日期：2005/8/2 12:00:00
中國標準分類號：Q92
國際標準分類號：91.220
適用范圍：1.1 This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to stationary and mobileequipment for the manufacture of precast reinforced products as defined in Clause 3 and applies to thesemachines also when used for the manufacture of non-reinforced moulded products.EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture ofconstructional products from concrete and calcium–silicate.This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010specific to the machines it covers.1.2 This document applies to the modules comprising production machines (with or without turnover demoulding)for the manufacturing of reinforced moulded products as shown below and illustrated in informative Annexes A andB.These machines are designed to perform the following cyclic operations:? manufacturing by vibration and even compression (oiling, mould feeding – concrete + reinforcement –,vibration, floating, interlocking, turnover, removing from mould);? storage of moulds and pallet boards for concrete hardening;? products destacking and packaging;? moulds and pallet boards return to the manufacturing module.Any of these operations may be manual, semi-automatic or automatic.This document deals with automatic and semi-automatic operations of modules A and C and with automaticoperations of module B.1.3 !This European Standard deals with all significant hazards pertinent to these machines, when they are usedas intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from thesignificant hazards.1.4 This document is not applicable to stationary and mobile equipment for the manufacture of precast products,which are manufactured before the date of publication of this document by CEN.