標準號：BS EN 1996-1-2-2005
中文標準名稱：歐洲規范 6.磚石工程結構的設計.一般規則.結構防火設計
英文標準名稱：Eurocode 6. Design of masonry structures - General rules - Structural fire design
標準類型：P24
發布日期：2005/6/30 12:00:00
實施日期：2005/6/30 12:00:00
中國標準分類號：P24
國際標準分類號：13.220.50;91.010.30;91.080.30
引用標準：EN 771-1;EN 771-2;EN 771-3;EN 771-4;EN 771-5;EN 771-6;EN 772-13;EN 988-1;EN 988-2;EN 1363;EN 1364;EN 1365;EN 1366;EN 1990;EN 1991;EN 1996;prEN 12602;EN 13279-1
適用范圍：(1)P This Part 1-2 of EN 1996 deals with the design of masonry structures for the accidentalsituation of fire exposure, and is intended to be used in conjunction with EN 1996-1-1, EN1996-2, 1996-3 and EN 1991-1-2. This part 1-2 only identifies differences from, orsupplements to, normal temperature design.(2)P This Part 1-2 deals only with passive methods of fire protection. Active methods are notcovered.(3)P This Part 1-2 applies to masonry structures which, for reasons of general fire safety, arerequired to fulfil certain functions when exposed to fire, in terms of:- avoiding premature collapse of the structure (load bearing function)- limiting fire spread (flames, hot gases, excessive heat) beyond designated areas(separating function)(4)P This Part 1-2 gives principles and application rules for designing structures for specifiedrequirements in respect of the aforementioned functions and levels of performance.(5)P This Part 1-2 applies to structures, or parts of structures, that are within the scope ofEN 1996-1-1, EN 1996-2 and EN 1996-3 and are designed accordingly.(6)P This Part 1-2 does not cover masonry built with Natural Stone units to EN771-6(7)P This Part 1-2 deals with the following:- non-loadbearing internal walls.- non-loadbearing external walls.- loadbearing internal walls with separating or non-separating functions.- loadbearing external walls with separating or non-separating functions.