標準號：BS EN 60947-5-1-2004+A1-2009
中文標準名稱：低壓開關設備和控制設備.控制/電路設備和開關元件.機電控制電路器件
英文標準名稱：Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements — Electromechanical control circuit devices
標準類型：K30
發布日期：2004/6/28 12:00:00
實施日期：2004/6/28 12:00:00
中國標準分類號：K30
國際標準分類號：29.120.40;29.130.20
引用標準：IEC 60050-441-1984;IEC 60050-446-1983;IEC 60112-2003;IEC 60068-2-6-1995;IEC 61000-4-2-1995;IEC 61000-4-2 AMD 1-1998;IEC 61000-4-2 AMD 2-2000;IEC 61000-4-3-2008;IEC 60417;IEC 60617;IEC 60947-1-2007;IEC 60947-4-1-2000;IEC 60947-4-1 AMD 1-2002;IEC 60947-4-1
適用范圍：This part of IEC 60947 applies to control circuit devices and switching elements intended forcontrolling, signalling, interlocking, etc., of switchgear and controlgear.It applies to control circuit devices having a rated voltage not exceeding 1 000 V a.c. (at afrequency not exceeding 1 000 Hz) or 600 V d.c.However, for operational voltages below 100 V a.c. or d.c., see note 2 of 4.3.1.1.This standard applies to specific types of control circuit devices such as:– manual control switches, for example pushbuttons, rotary switches, foot switches, etc.;– electromagnetically operated control switches, either time-delayed or instantaneous, forexample contactor relays;– pilot switches, for example pressure switches, temperature sensitive switches (thermostats),programmers, etc.;– position switches, for example control switches operated by part of a machine ormechanism;– associated control circuit equipment, for example indicator lights, etc.NOTE 1 A control circuit device includes (a) control switch(es) and associated devices such as (an) indicatorlight(s).NOTE 2 A control switch includes (a) switching element(s) and an actuating system.NOTE 3 A switching element may be a contact element or a semiconductor element.It also applies to specific types of switching elements associated with other devices (whosemain circuits are covered by other standards) such as:– auxiliary contacts of a switching device (e.g. contactor, circuit breaker. etc.) which are notdedicated exclusively for use with the coil of that device;– interlocking contacts of enclosure doors;– control circuit contacts of rotary switches;– control circuit contacts of overload relays.Contactor relays shall also meet the requirements and tests of IEC 60947-4-1 except for theutilization category which shall comply with this standard.This standard does not include the relays covered in IEC 60255 or in the IEC 61810 series,nor automatic electrical control devices for household and similar purposes.The colour requirements of indicator lights, pushbuttons, etc., are found in IEC 60073 andalso in publication 2 of the International Commission of Illumination (CIE).The object of this standard is to state:a) The characteristics of control circuit devices.b) The electrical and mechanical requirements with respect to:1) The various duties to be performed.2) The significance of the rated characteristics and of the markings.3) The tests to verify the rated characteristics.c) The functional requirements to be satisfied by the control circuit devices with respect to:1) Environmental conditions, including those of enclosed equipment.2) Dielectric properties.3) Terminals.