標準號：BS EN ISO 16032-2004
中文標準名稱：聲學.建筑物中輔助設備的聲壓級測量.工程法
英文標準名稱：Acoustics - Measurement of sound pressure level from service equipment in buildings - Engineering method
標準類型：P31
發布日期：2004/9/29 12:00:00
實施日期：2004/9/29 12:00:00
中國標準分類號：P31
國際標準分類號：17.140.20;91.140.01
適用范圍：ISO 16032:2004 specifies methods for measuring the sound-pressure level produced by service equipment attached to or installed in buildings. It specifically covers measurements on sanitary installations, mechanical ventilation, heating and cooling service equipment, lifts, rubbish chutes, boilers, blowers, pumps and other auxiliary service equipment, and motor-driven car park doors, but can also be applied to other equipment attached to or installed in buildings.The methods are suitable for rooms with volumes of approximately 300 cubic metres or less in e.g. dwellings, hotels, schools, offices and hospitals. The standard is not in general intended for measurements in large auditoria such as concert halls. However, the operating conditions and operating cycles in Annex B can be used in such cases.The service equipment sound-pressure level is determined as the maximum A-weighted and optionally C-weighted sound-pressure level occurring during a specified operation cycle of the service equipment under test, or as the equivalent continuous sound-pressure level determined with a specified integration time. A-weighted and C-weighted values are calculated from octave-band measurements.