標準號：BS EN ISO 3497-2001
中文標準名稱：金屬覆層.覆層厚度的測量.X射線光譜測定法
英文標準名稱：Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods
標準類型：A29
發布日期：2001/3/15 12:00:00
實施日期：2001/3/15 12:00:00
中國標準分類號：A29
國際標準分類號：17.040.20;25.220.40
適用范圍：WARNING Problems concerning protection of personnel against X-rays are not covered by this International Standard. For information on this important aspect, reference should be made to current international and national standards, and to local regulations, where these exist. 1 This International Standard specifies methods for measuring the thickness of metallic coatings by the use of X-ray spectrometric methods. 2 The measuring methods to which this International Standard applies are fundamentally those that determine the mass per unit area. Using a knowledge of the density of the coating material, the results of measurements can also be expressed as linear thickness of the coating. 3 The measuring methods permit simultaneous measurement of coating systems with up to three layers, or simultaneous measurement of thickness and compositions of layers with up to three components. 4 The practical measurement ranges of given coating materials are largely determined by the energy of the characteristic X-ray fluorescence to be analysed and by the acceptable measurement uncertainty and can differ depending upon the instrument system and operating procedure used.