標準號：SAE AMS 2630C-2010
中文標準名稱：超過0.5 inch(12.7 mm)厚產品超聲波檢驗
英文標準名稱：Inspection, Ultrasonic Product Over 0.5 inch (12.7 mm) Thick
標準類型：H26;V04
發布日期：2010/1/5 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H26;V04
國際標準分類號：49.025.99
引用標準：ASME B46.1-1995;ASTM E 127-2007;ASTM E 127-2010;ASTM E 317-2006;ASTM E 428-2008;ASTM E 1065-2008;SAE J 300-2009;SAE AMS 2632A-1995;ATA-105;NAS-410;SNT-TC-1A
適用范圍：This specification covers procedures for ultrasonic inspection, by pulse-echo procedure, of flat, rectangular, round, cylindrical, and contoured products having a thickness or cross-sectional dimension greater than 0.50 inch (12.7 mm), using either contact or immersion methods, and using the longitudinal-wave or shear-wave modes or combinations of the two, as necessary. This specification may apply to testing finished machined parts provided the parts can meet the basic testability requirements, such as size, contour, metallurgical structure, and thickness. Parts with section thickness both over 0.50 inch (12.7 mm) and 0.5 inch (12.7 mm) and under may be tested using the procedure and AMS 2632, as applicable. This procedure has been used typically for locating and defining internal defects such as cracks, voids, laminations, and other structural discontinuities which may or may not be exposed to the surface, but usage is not limited to such applications.