標準號：BS 1726-1-2010
中文標準名稱：用圓形線材和棒材制的圓柱形螺旋彈簧.BS EN 15800標準沒有包括的熱盤管彈簧和冷盤管彈簧,與一般彈簧的規格和公差的試驗方法指南.壓縮彈簧
英文標準名稱：Cylindrical helical springs made from round wire and bar. Guide to methods of specifying and tolerancing hot coiled springs, and cold coiled springs not covered by BS EN 15800, and general spring testing. Compression springs
標準類型：J26
發布日期：2010/11/30 12:00:00
實施日期：2010/11/30 12:00:00
中國標準分類號：J26
國際標準分類號：21.160
適用范圍：This part of BS 1726 provides guidance on methods of specifying andtolerancing hot coiled compression springs, and cold coiled springs thatfall outside the size range limits specified in BS EN 15800. In addition,this standard includes in Annex A the general testing methods forparallel sided helical compression springs that are applicable to bothhot and cold coiled springs manufactured from circular section material.Two grades of tolerance, 1 and 2, are given for hot coiled circularsection springs, or cold coiled springs that fall outside the size rangesspecified in BS EN 15800.Three types of end coils are provided for, i.e. open end, closed end,and closed and ground end, the last of these being applicable only tosprings where the diameter or axial dimension of material is 0.5 mmor greater.This part of BS 1726 differentiates between springs that have or havenot been stress relieved after forming (designated group A), andsprings, the material of which has undergone a structural change byheat treatment after forming (designated group B).This standard gives two methods of specifying springs for generalpurposes and one method of testing springs.