標準號：BS DD CLC/TS 60034-25-2008
中文標準名稱：旋轉式電機.專為變頻電源設計的交流電動機的設計和性能指南
英文標準名稱：Rotating electrical machines - Guidance for the design and performance of a.c. motors specifically designed for converter supply
標準類型：K20
發布日期：2009/3/31 12:00:00
實施日期：2009/3/31 12:00:00
中國標準分類號：K20
國際標準分類號：29.160.30
引用標準：IEC 60034-1;IEC 60034-2;IEC 60034-6;IEC 60034-9;IEC 60034-14;IEC 60034-17-2006;IEC 61000-5-1;IEC 61000-5-2;IEC 61800-2;IEC 61800-3;IEC 61800-5-1;IEC 61800-5-2
適用范圍：This part of IEC 60034 describes the design features and performance characteristics of a.c.motors specifically designed for use on converter supplies. It also specifies the interfaceparameters and interactions between the motor and the converter including installationguidance as part of a power drive system.The general requirements of relevant parts of the IEC 60034 series of standards also apply tomotors within the scope of this technical specification.NOTE 1 For motors operating in potentially explosive atmospheres, additional requirements as described in theIEC 60079 series apply.NOTE 2 This technical specification is not primarily concerned with safety. However, some of itsrecommendations may have implications for safety, which should be considered as necessary.NOTE 3 Where a converter manufacturer provides specific installation recommendations, they should takeprecedence over the recommendations of this technical specification.