標準號：IEC 62329-3-101-2010
中文標準名稱：熱縮模具形狀.第3部分:形狀尺寸、材料要求和兼容性性能的要求規范.活頁101:聚烯烴半剛性的熱縮模具形狀的有限火患、材料要求和系統性能
英文標準名稱：Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a
標準類型：J46
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J46
國際標準分類號：29.035.01;29.035.20
引用標準：IEC 60695-11-10;IEC 62329-1;IEC 62329-2-2006;IEC 62329-3-100-2010;IEC 60757-1983;ISO 1817- 2005
適用范圍：This sheet of IEC 62329-3 gives the requirements for heat-shrinkable moulded shapes, polyolefin,semi-rigid, limited fire hazard, material requirements and system performance.Experience of product performance indicates that this moulded shape material is suitable forinclusion in systems for operation in the following temperature range: –30 °C to + 105 °C.The moulded shapes may be supplied with a pre-coated adhesive. Refer to themanufacturers/suppliers for options. A guide to adhesive compatibility is given in Annex A.These moulded shapes are normally supplied in the styles and dimensions given in IEC 62329-3-100. The colour is normally black.Styles and dimensions other than those specifically listed in IEC 62329-3-100 may be available ascustom items. These items shall be considered to comply with this standard if they comply with theproperty requirements listed in Table 1 with the exception of dimensions.Materials that conform to this specification meet established levels of performance. However, theselection of a material by a user for a specific application should be based on the actualrequirements necessary for adequate performance in that application and not based on thisspecification alone.