標準號：DIN EN ISO 18595-2007
中文標準名稱：電阻焊接.鋁和鋁合金的點焊.可焊性、焊接和測試
英文標準名稱：Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007); English version of DIN EN ISO 18595:2007-12
標準類型：J33
發(fā)布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J33
國際標準分類號：25.160.10
引用標準：ISO 5184;ISO 5821;ISO 5830;ISO 10447;ISO 14329-2003;ISO 15614-12;ISO 669-2000;ISO 5182
適用范圍：This International Standard specifies requirements for resistance spot welding in the fabrication of assembliesof aluminium sheet, extrusions (both work- and age-hardening alloys) and/or cast material comprising two orthree thicknesses of metal, where the maximum single (sheet) thickness of components to be welded is withinthe range 0,6 mm to 6 mm.This International Standard is applicable to the welding of sheets or plates of dissimilar thickness where thethickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses where the totalthickness is less than or equal to 9 mm.Welding with the following types of machines is within the scope of this International Standard:-- pedestal welding machines; O-- gun welders;-- automatic welding equipment where the components are fed by robots or automatic feeding equipment;-- multi-welders;-- robotic welders.Information on appropriate welding equipment is given in Annex A and on spot welding conditions in Annex B.The latter are for guidance only and may require modification depending on service conditions of thefabrication, type of welding equipment, characteristics of the secondary circuit, electrode material andgeometry.The welding of coated material, e.g. zinc-coated or anodised material, is not within the scope of thisInternational Standard.