標準號：IEC 60794-3-50-2008
中文標準名稱：光纖光纜.第3-50部分:室外光纖光纜.充氣和/或拉/拽式燃?xì)夤馨惭b用燃?xì)夤艿拦饫|和分管用系列規范
英文標準名稱：Optical fibre cables - Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes
標準類型：M33
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：M33
國際標準分類號：33.180.10
引用標準：IEC 60304;IEC 60793-1-20;IEC 60793-1-40;IEC 60793-1-44;IEC 60793-2;IEC 60793-2-50;IEC 60794-1-1;IEC 60794-1-2;IEC 60794-3;IEC 60794-3-10;IEC 60811-1-1-1993;IEC 60811-5-1-1990
適用范圍：This part of IEC 60794 is a family specification that covers gas pipe cables and subducts forinstallation by blowing and/or pulling/dragging in high pressure gas pipes (400 mbar to 4 bar).Systems built with components covered by this standard are subject to the requirements ofsectional specification IEC 60794-3.Gas pipe cable and subduct constructions have to meet the different requirements of the gas-companies and/or associations regarding chemical, environmental, operational interactionsand in general maintenance conditions.I/O-ports for the inlet and outlet of the gas pipe cables and/or subducts are housing thesealing system assuring the absolute gas tightness preventing any gas leakage due to theinstallation of the gas pipe cables into the gas pipes.A table of preferential applications, describing gas pipe cable characteristics versus methodsof installation is reported in Annex A for high pressure gas pipe cables.Clause 4 describes a blank detail specification for gas pipe cables and subducts forinstallation by blowing and/or pulling/dragging in high pressure gas pipes. It incorporatessome minimum requirements.Detail specifications may be prepared on the basis of this family specification.The parameters specified in this standard may be affected by measurement uncertaintyarising either from measurement errors or calibration errors due to lack of suitable standards.Acceptance criteria should be interpreted with respect to this consideration.The number of fibres tested is representative of the gas pipe cable and should be agreedbetween the customer and the supplier.