標準號：DIN EN ISO 1179-4-2008
中文標準名稱：通用和液壓傳動用連接件.帶彈性體密封或金屬對金屬密封的ISO 228-1螺紋的孔口和螺柱端.第4部分:僅與金屬對金屬密封(B型)的通用螺柱端
英文標準名稱：Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179
標準類型：J15
發布日期：2008/8/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：J15
國際標準分類號：23.100.40
引用標準：ISO 228-1;ISO 4759-1-2000;ISO 5598;ISO 19879
適用范圍： This part of ISO 1179 specifies dimensions, performance requirements and test procedures for stud ends with ISO 228-1 threads and metal-to-metal sealing for general use only. These stud ends should not be used forleak-free hydraulic fluid power applications.Stud ends in accordance with this part of ISO 1179 may be used at working pressures up to 40 MPa (400 bar)for the S series, up to 25 MPa (250 bar) for the L series, and up to 10 MPa (100 bar) for the LL series. Thepermissible working pressure depends upon size, materials, design, working conditions, application, etc.Conformance to the dimensional information in this part of ISO 1179 does not guarantee rated performance.Each manufacturer shall perform tests according to the specification contained in this part of ISO 1179 inorder to ensure that components made to this part of ISO 1179 comply with the performance ratings.NOTE 1 This part of ISO 1179 applies to connectors detailed in ISO 8434-1 and ISO 8434-2.NOTE 2 The introduction of this part of ISO 1179 gives recommendations for ports and stud ends to be used for newdesigns in hydraulic and pneumatic fluid power applications.