標準號：SAE AMS 7379-2008
中文標準名稱：橡膠:航空器發動機油,燃料和液壓系統中彈性密封物用硬度為70～80,低溫密封Tg -40℉(-40℃)的碳氟化合物人造橡膠(FKM)
英文標準名稱：Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 °F (-40 °C) for Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
標準類型：V13
發布日期：2008/7/16 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V13
國際標準分類號：49.025.40
引用標準：SAE AMS 2817;SAE AS 568;SAE AIR 851;ASTM D 297;ASTM D 395;ASTM D 471;ASTM D 573;ASTM D 1329;ASTM D 1414;ASTM D 1418;ASTM D 2240;ISO 3601-3;PRI PD 2000
適用范圍：1.1 FormThis specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to beused in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospaceapplications.1.2 ApplicationThese products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels,and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. Thisfluorocarbon (FKM) has a service temperature range of -60 to +400 °F (-51 to +204 °C) in air.1.3 Safety - Hazardous MaterialsWhile the materials, methods, applications, and processes described or referenced in this specification may involve theuse of hazardous materials, this specification does not address the hazards, which may be involved in such use. It is thesole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to takenecessary precautionary measures to ensure the health and safety of all personnel involved.