標準號：BS EN ISO 27874-2008
中文標準名稱：金屬和其它無機涂層.電氣、電子和工程用電鍍金和金合金涂層.規范和試驗方法
英文標準名稱：Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods
標準類型：A29
發布日期：2008/11/30 12:00:00
實施日期：2008/11/30 12:00:00
中國標準分類號：A29
國際標準分類號：25.220.40
引用標準：ISO 1463;ISO 2064;ISO 2080;ISO 2177;ISO 2819;ISO 3497;ISO 3543;ISO 3868;ISO 3882;ISO 4516;ISO 4518;ISO 4519;ISO 4524-2;ISO 4524-3-1985;ISO 4524-6;ISO 9587;ISO 9588;ISO 10289;ISO 10308;ISO 12687;ISO 14647;IEC 60068-2-20
適用范圍：This International Standard specifies the requirements for electrodeposited gold and gold alloy coatings forelectrical, electronic and other engineering applications on metallic and non-metallic substrates. It alsospecifies test methods for measuring the properties of the coatings.Although this International Standard does not specify the condition, finish or surface roughness of the basismaterial prior to electroplating, the appearance and serviceability of electroplated gold or gold alloy coatingsdepends on the condition of the basis material. It is essential that the purchaser specify the surface finish androughness of the basis material in order to conform to the product requirements.This International Standard does not apply to coatings on threaded articles or to coatings on sheet or strip innon-fabricated form.