標準號：ISO 1873-2-2007
中文標準名稱：塑料.聚丙烯(PP)模塑和擠塑材料.第2部分:試樣制備和性能測定
英文標準名稱：Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
標準類型：G32
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：G32
國際標準分類號：83.080.20
引用標準：ISO 62;ISO 75-2;ISO 178;ISO 179-1;ISO 179-2;ISO 293;ISO 294-1;ISO 294-3;ISO 294-4;ISO 527-2;ISO 899-1;ISO 1133-2005;ISO 1183-1;ISO 1183-2;ISO 1183-3;ISO 1628-3;ISO 2818;ISO 3167;ISO 4589-2;ISO 6603-2;ISO 8256;ISO 10350-1;ISO 11357-2;ISO 11357-3;ISO 11359-
適用范圍：This part of ISO 1873 specifies the methods of preparation of test specimens and the test methods to be usedin determining the properties of PP moulding and extrusion materials. Requirements for handling test materialand for conditioning both the test material before moulding and the specimens before testing are given.Procedures and conditions for the preparation of test specimens and procedures for measuring properties ofthe materials from which these specimens are made are given. Properties and test methods which aresuitable and necessary to characterize PP moulding and extrusion materials are listed.The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wideuse for, or of particular significance to, these moulding and extrusion materials are also included in this part ofISO 1873, as are the designatory properties specified in Part 1.In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparationand conditioning, the specimen dimensions and the test procedures specified herein. Values determined willnot necessarily be identical to those obtained using specimens of different dimensions or prepared usingdifferent procedures.