標準號：BS EN 14256-2007
中文標準名稱：非結構用木材粘結劑.耐靜荷載的試驗方法和要求
英文標準名稱：Adhesives for non-structural wood applications - Test method and requirements for resistance to static load
標準類型：G39
發布日期：2007/8/31 12:00:00
實施日期：2007/8/31 12:00:00
中國標準分類號：G39
國際標準分類號：83.180
引用標準：EN 205-2003;EN 923-2005;EN 13183-1;EN 13183-2
適用范圍：This European Standard specifies a method for determining the ability of a test piece bonded with athermoplastic adhesive, to support a given load for a specified time without fracture or excessive distortion,and specifies performance requirements for mean survival time.It should be used in conjunction with EN 204 and EN 205, which describe durability classes andcorresponding test methods for non-structural wood adhesives based on their ability to withstand variouswater treatments and relatively rapidly applied loads. The test described in this standard may be used toassess joints made with thin glue line, as defined in EN 205.NOTE The test described in this standard is not a mandatory requirement for the classification of adhesives into theclasses D1, D2, D3 and D4 given in EN 204. It is an additional test that can be specified by a purchaser if required.