標準號：DIN EN ISO 16276-1-2007
中文標準名稱：防護涂料系統對鋼結構的腐蝕防護.涂層粘附/粘聚(斷裂強度)的評估和驗收標準.第1部分:脫落測試
英文標準名稱：Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007); English version of DIN EN ISO 16276-1:
標準類型：A29
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：A29
國際標準分類號：87.040;91.080.10
引用標準：ISO 4624;ISO 12944-7;ISO 12944-8;ISO 19840
適用范圍：This part of ISO 16276 specifies procedures for assessing the fracture strength of a protective paint coating of any thickness on a steel substrate of thickness not less than 10 mm. The procedures given in this part of ISO 16276 are based on methods used with different types of pull-off test equipment. The results obtained using such different types of equipment are not comparable.NOTE 1 Substrates of less than 10 mm in thickness can be tested if they are strengthened by the sandwich technique(see ISO 4624) or by the nature of the structure (e.g. I-beam or backing-plate). Otherwise, test panels with a thickness ofat least 10 mm coated in the same way as the structure can be,used, or the method specified ISO 16276-2 can be used.This part of ISO 16276 is only applicable if a fracture strength value is specified, together with the type of testequipment and the manufacturer of the equipment. Usually, this information is included in contractdocumentation.NOTE 2 A value for the fracture strength is only meaningful if the requirements concerning the ambient conditions(see 6.4.2) are met.This part of ISO 16276 also specifies suitable equipment and defines inspection areas, sampling plans andacceptance/rejection criteria.It does not give any values of the fracture strength of different protective paint coatings.