標準號：BS EN 1993-1-7-2007
中文標準名稱：歐洲法規 3.鋼結構的設計.受平面承載以外的電鍍結構
英文標準名稱：Eurocode 3. Design of steel structures - Plated structures subject to out of plane loading
標準類型：P26
發布日期：2007/7/31 12:00:00
實施日期：2007/7/31 12:00:00
中國標準分類號：P26
國際標準分類號：91.010.30;91.080.10
引用標準：EN 1993 Eurocode 3;EN 1993 Part 1.1;EN 1993 Part 1.3;EN 1993 Part 1.4;EN 1993 Part 1.5;EN 1993 Part 1.6;EN 1993 Part 1.8;EN 1993 Part 1.9;EN 1993 Part 1.10;EN 1993 Part 1.12;EN 1993 Part 4.1;EN 1993 Part 4.2
適用范圍：(1)P EN 1993-1-7 provides basic design rules for the structural design of unstiffened and stiffened plateswhich form part of plated structures such as silos, tanks or containers, that are loaded by out of plane actions.It is intended to be used in conjunction with EN 1993-1-1 and the relevant application standards.(2) This document defines the design values of the resistances: the partial factor for resistances may betaken from National Annexes of the relevant application standards. Recommended values are given in therelevant application standards.(3) This Standard is concerned with the requirements for design against the ultimate limit state of:– plastic collapse;– cyclic plasticity;– buckling;– fatigue.(4) Overall equilibrium of the structure (sliding, uplifting, overturning) is not included in this Standard,but is treated in EN 1993-1-1. Special considerations for specific applications may be found in the relevantapplications parts of EN 1993.(5) The rules in this Standard refer to plate segments in plated structures which may be stiffened orunstiffened. These plate segments may be individual plates or parts of a plated structure. They are loaded byout of plane actions.(6) For the verification of unstiffened and stiffened plated structures loaded only by in-plane effects seeEN 1993-1-5. In EN 1993-1-7 rules for the interaction between the effects of inplane and out of planeloading are given.(7) For the design rules for cold formed members and sheeting see EN 1993-1-3.(8) The temperature range within which the rules of this Standard are allowed to be applied are defined inthe relevant application parts of EN 1993.(9) The rules in this Standard refer to structures constructed in compliance with the executionspecification of EN 1090-2.(10) Wind loading and bulk solids flow should be treated as quasi-static actions. For fatigue, the dynamiceffects must be taken into account according to EN 1993-1-9. The stress resultants arising from the dynamicbehaviour are treated in this part as quasi-static.