標準號：BS EN ISO 252-2007
中文標準名稱：輸送帶.結構元件間的粘附.試驗方法
英文標準名稱：Conveyor belts - Adhesion between constitutive elements - Test methods
標準類型：J81
發布日期：2007/7/31 12:00:00
實施日期：2007/7/31 12:00:00
中國標準分類號：J81
國際標準分類號：53.040.20
適用范圍：This International Standard specifies two test methods, A and B, for determining the adhesion strength between constitutive elements of a conveyor belt, i.e. between plies and between covers and carcass. Basic test conditions are in conformity with ISO 36. It is applicable to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement, and textile-reinforced belts with a full-thickness tensile strength of less than 160 N/mm. It is not suitable or valid for light conveyor belts as described in ISO 21183-1[1]. NOTE Methods A and B are alternative options, but the mean adhesive force values calculated for the two methods can be different. Also, as both methods might not be equally suitable for all belt constructions, it is advisable that the advice of the belt manufacturer be sought.