標準號：BS EN 60684-3-211-2007
中文標準名稱：絕緣柔性套管.各種型號套管的規范.收縮比率為2:1的半剛性聚烯烴熱縮套管
英文標準名稱：Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
標準類型：K15
發布日期：2007/6/29 12:00:00
實施日期：2007/6/29 12:00:00
中國標準分類號：K15
國際標準分類號：29.035.20
引用標準：IEC 60684-1-2003;IEC 60684-2-1997;IEC 60684-2/A1-2003;IEC 60684-2/A2-2005;IEC 60757-1983;ISO 1817-2005
適用范圍：This part of IEC 60684 gives the requirements for four types of semi-rigid, heat-shrinkablepolyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable fortemperatures up to 135 °C.? Type A: general purpose, flame-retarded, opaque colours;? Type B: general purpose, non flame-retarded, translucent;? Type C: fluid resistant, flame-retarded, opaque colours;? Type D: fluid resistant, non flame-retarded, translucent.The sleeving is normally available in internal diameter sizes up to 12,7 mm as supplied, in thefollowing colours: black, white, red, yellow, blue and translucent.Sizes or colours other than those specifically listed in this standard may be available ascustom items. The items are considered to comply with this standard if they comply withthe property requirements listed in tables 2, 3 and also with the property requirements ofTable 4 for types C and D, excluding dimensions.Materials which conform to this specification meet established levels of performance.However, the selection of a material by a user for a specific application should be based onthe actual requirements necessary for adequate performance in that application and notbased on this specification alone.