標準號：ISO 9170-1-2008
中文標準名稱：醫用氣體管道系統用終端設備.第1部分:與壓縮醫用氣體和真空管道系統一起使用的終端設備
英文標準名稱：Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum
標準類型：C30
發布日期：2008/7/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：C30
國際標準分類號：11.040.10
引用標準：ISO 32-1977;ISO 5359;ISO 6506-1-2005;ISO 7396-1-2007;ISO 11114-3-1997;ISO 14971-2007;ISO 15001-2003
適用范圍：1.1 This part of ISO 9170 applies to:a) terminal units intended for use in medical gas pipeline systems in accordance with ISO 7396-1, for use with the following medical gases: -- oxygen; -- nitrous oxide; -- medical air; -- carbon dioxide; -- oxygen/nitrous oxide mixture [50 %/50 % (by volume)];b) terminal units intended for use in medical gas pipeline systems in accordance with ISO 7396-1, for use with the following gases and services: -- oxygen-enriched air; -- air for driving surgical tools; -- nitrogen for driving surgical tools; -- vacuum.NOTE 1 Different names or symbols are used for air for driving surgical tools, such as instrument air, surgical air, airmotor, air-700 and air-800.NOTE 2 The requirements of this part of ISO 9170 can be used as guidelines for terminal units for other gases. Theseother gases will be considered for inclusion in this part of ISO 9170 when they come into general use.It is intended especially to ensure the gas-specific assembly of terminal units and to prevent their interchangebetween different gases and services.1.2 This part of ISO 9170 specifies requirements for terminal units for supply and disposal of nitrogen or airfor driving surgical tools.1.3 This part of ISO 9170 specifies requirements for probes intended to be connected to the gas-specificconnection point which is part of the terminal unit.1.4 This part of ISO 9170 does not specify the dimensions of probes or of the gas-specific connectionpoints of the terminal units.NOTE Certain regional or national standards specifying dimensions of probes and gas-specific connection points aregiven in the Bibliography1.5 This part of ISO 9170 does not specify the dimensions of NIST connectors, which are defined inISO 5359.1.6 This part of ISO 9170 does not specify the dimensions of DISS connectors, which are defined inCGA V-5l) [12]1.7 This part of ISO 9170 does not specify the requirements for terminal units for anaesthetic gasscavenging systems (AGSS), which are covered in ISO 9170-2.