標準號：BS EN 62363-2011
中文標準名稱：輻射防護儀.便攜式光子污染測量計和監控器
英文標準名稱：Radiation protection instrumentation. Portable photon contamination meters and monitors
標準類型：F84
發布日期：2008/6/30 12:00:00
實施日期：2008/6/30 12:00:00
中國標準分類號：F84
國際標準分類號：13.280
引用標準：IEC 60050-393-2003;IEC 60050(394)-2007;IEC 60068-2-27;IEC 60086;IEC 60325-2002;IEC 61187-1993;ISO 7503-1-1988;ISO 7503-3-1996;ISO 8769-2-1996;ISO 11929-1-2000
適用范圍：This International Standard is applicable to portable and transportable contamination metersand monitors designed for the direct measurement or the direct detection of surfacecontamination by photon radiation emitting radionuclides and which comprise at least:– a detection assembly (comprising counter tube, scintillation detector or semiconductordetector, etc.), which may be connected either rigidly or by means of a flexible cable orincorporated into a single assembly;– a measurement assembly.The standard is applicable to:– photon surface contamination meters;– photon surface contamination monitors.The standard is applicable to detection assemblies that are designed to measure photoncontamination from radionuclides which emit photons with energy in excess of 5 keV. Inparticular, this standard should be used to assess the performance of assemblies used todemonstrate that material is free from surface contamination by photon emitting radionuclides.This standard is also applicable to special purpose assemblies and to assemblies specificallydesigned to provide limited spectroscopic information to the user.NOTE These detection assemblies may be used to measure photon emissions from radionuclides that also emitalpha and beta radiations, where the alpha and beta emissions may be shielded due to the nature of thecontamination. If shielding of the radioactive emissions occurs, then strictly speaking, the contamination is near torather than on the surface of the article being monitored.The object of this standard is to lay down standard requirements and to give examples ofacceptable methods, and also to specify general characteristics, general test conditions,radiation characteristics, electrical safety, environmental characteristics, and the requirementsof the identification certificate for photon contamination meters and monitors.