標準號：BS EN 10302-2008
中文標準名稱：耐蠕變的鋼、鎳和鈷合金
英文標準名稱：Creep resisting steels, nickel and cobalt alloys
標準類型：H40
發布日期：2008/4/30 12:00:00
實施日期：2008/4/30 12:00:00
中國標準分類號：H40
國際標準分類號：77.120.01;77.140.01;77.150.01
引用標準：EN 10002-1;EN 10002-5;EN 10020-2000;EN 10021-2006;EN 10027-1;EN 10027-2;EN 10052-1993;10079-2007;EN 10163-2;EN 10168-2004;EN 10204;EN 10221;prCEN/TR 10261;EN ISO 377-1997;EN ISO 14284-2002
適用范圍：1.1 This European Standard covers the grades of wrought steels and alloys listed in Table 1 and Table 2,which are usually employed for components and equipment, for which the main requirement is their creepresistance under mechanical long-time stressing at temperatures above 500 °C.NOTE Heat resisting grades given in EN 10095 [9] may also be used for similar applications if so agreed.1.2 This European Standard specifies the technical delivery conditions for semi-finished products, for hot orcold rolled sheet/plate and strip, hot or cold formed (cold drawn) bars, rods, wire and sections.1.3 The general technical delivery conditions specified in EN 10021 apply in addition to the specifications ofthis European Standard, unless otherwise specified in this European Standard.1.4 This European Standard does not apply to components manufactured by further processing the productforms listed in 1.2 with quality characteristics altered as a result of such further processing.1.5 This European Standard shall not be used for aerospace and pressure purposes.1.6 For steels and alloys with similar chemical composition, but intended for different applications, see theBibliography.