標準號：DIN EN 10111-2008
中文標準名稱：冷加工成型的連續熱軋低碳鋼帶和薄鋼板.交貨技術條件
英文標準名稱：Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions; English version of DIN EN 10111:2008-06
標準類型：H46
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H46
國際標準分類號：77.140.50
引用標準：EN 10002-1;EN 10021;EN 10027-1;EN 10027-2;EN 10051;EN 10079;EN 10204;EN ISO 14284
適用范圍： This European Standard specifies the grades of continuously hot rolled Iow carbon steel sheet and strip (in coils) for cold forming. Depending on its actual width, strip is classified as:-- hot rolled wide strip if its width is greater than or equal to 600 mm;-- hot rolled slit wide strip if its width is less than 600 mm. For each grade, it specifies the chemical composition and the mechanical properties.This European Standard is applicable to products of thickness not less than 1,0 mm and not exceeding 11 mm.This European Standard is not applicable to products covered by other standards, such as:-- hot rolled products of non-alloy structural steels for general use (see EN 10025 all parts);-- steel sheet for pressure purposes (see EN 10028 all parts);-- steel sheet for welded gas cylinders (see EN 10120);-- quenched and tempered steels (see EN 10083-1 and EN 10083-2).