標準號：DIN EN 754-7-2008
中文標準名稱：鋁和鋁合金.冷拉桿材/棒材和管材.第7部分:無縫管的尺寸和形狀公差
英文標準名稱：Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; English version of DIN EN 754-7:2008-06
標準類型：H61
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：H61
國際標準分類號：77.150.10
適用范圍：This document specifies the tolerances on dimensions and form for aluminium and aluminium alloys colddrawn seamless tubes with an outside diameter (OD) from 3 mm to 350 mm (round tube, see Figure 1) orwith a cross section contained within a circumscribing circle (CD) from 8 mm to 300 mm (other than roundtube, see Figure 2) supplied in straight lengths.This standard only applies to tube produced by the seamless die/mandrel method of extrusion (and then colddrawn to the final dimensions required).The temper designations used in this part are according to EN 515.This document applies to cold drawn seamless tube for general engineering applications.This document does not apply to:-- cold drawn tube produced by the porthole/bridge method (EN 754-8),-- tubes delivered in coils (EN 13958),-- coiled tubes cut to lenath (EN 13958).