標準號：IEC 61000-4-3 Edition 3.1-2008
中文標準名稱：電磁兼容性(EMC).第4-3部分:試驗和測量技術.輻射、射頻和電磁場抗干擾試驗
英文標準名稱：Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
標準類型：L06
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：L06
國際標準分類號：33.100.20
引用標準：IEC 60050-161;IEC 61000-4-6
適用范圍：This part of IEC 61000 is applicable to the immunity requirements of electrical and electronicequipment to radiated electromagnetic energy. It establishes test levels and the required testprocedures.The object of this standard is to establish a common reference for evaluating the immunity ofelectrical and electronic equipment when subjected to radiated, radio-frequency electromagneticfields. The test method documented in this part of IEC 61000 describes a consistentmethod to assess the immunity of an equipment or system against a defined phenomenon.NOTE 1 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC.As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunitytest standard should be applied or not, and if applied, they are responsible for determining the appropriate testlevels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committeesin the evaluation of the value of particular immunity tests for their products.This part deals with immunity tests related to the protection against RF electromagnetic fieldsfrom any source.Particular considerations are devoted to the protection against radio-frequency emissionsfrom digital radiotelephones and other RF emitting devices.NOTE 2 Test methods are defined in this part for evaluating the effect that electromagnetic radiation has on theequipment concerned. The simulation and measurement of electromagnetic radiation is not adequately exact forquantitative determination of effects. The test methods defined are structured for the primary objective ofestablishing adequate repeatability of results at various test facilities for qualitative analysis of effects.This standard is an independent test method. Other test methods may not be used assubstitutes for claiming compliance with this standard.