標準號：BS EN 1993-1-6-2007
中文標準名稱：歐洲法規 3.鋼結構的設計.殼層結構的強度和穩定性
英文標準名稱：Eurocode 3. Design of steel structures - Strength and Stability of Shell Structures
標準類型：Q73
發布日期：2007/5/31 12:00:00
實施日期：2007/5/31 12:00:00
中國標準分類號：Q73
國際標準分類號：91.010.30;91.080.10
引用標準：EN 1090-2;EN 1990;EN 1991;EN 1993 Part 1.1;EN 1993 Part 1.3;EN 1993 Part 1.4;EN 1993 Part 1.5;EN 1993 Part 1.9;EN 1993 Part 1.10;EN 1993 Part 1.12;EN 1993 Part 2;EN 1993 Part 3.1;EN 1993 Part 3.2;EN 1993 Part 4.1;EN 1993 Part 4.2;EN 1993 Part 4.3;EN 1993
適用范圍：(1) EN 1993-1-6 gives basic design rules for plated steel structures that have the form of a shell ofrevolution.(2) This Standard is intended for use in conjunction with EN 1993-1-1, EN 1993-1-3, EN 1993-1-4,EN 1993-1-9 and the relevant application parts of EN 1993, which include:Part 3.1 for towers and masts;Part 3.2 for chimneys;Part 4.1 for silos;Part 4.2 for tanks;Part 4.3 for pipelines.(3) This Standard defines the characteristic and design values of the resistance of the structure.(4) This Standard is concerned with the requirements for design against the ultimate limit states of:plastic limit;cyclic plasticity;buckling;fatigue.(5) Overall equilibrium of the structure (sliding, uplifting, overturning) is not included in thisStandard, but is treated in EN 1993-1-1. Special considerations for specific applications are includedin the relevant application parts of EN 1993.(6) The provisions in this Standard apply to axisymmetric shells and associated circular or annularplates and to beam section rings and stringer stiffeners where they form part of the complete structure.General procedures for computer calculations of all shell forms are covered. Detailed expressions forthe hand calculation of unstiffened cylinders and cones are given in the Annexes.(7) Cylindrical and conical panels are not explicitly covered by this Standard. However, theprovisions can be applicable if the appropriate boundary conditions are duly taken into account.(8) This Standard is intended for application to steel shell structures. Where no standard exists forshell structures made of other metals, the provisions of this standards may be applied provided thatthe appropriate material properties are duly taken into account.(9) The provisions of this Standard are intended to be applied within the temperature range definedin the relevant EN 1993 application parts. The maximum temperature is restricted so that theinfluence of creep can be neglected if high temperature creep effects are not covered by the relevantapplication part.(10) The provisions in this Standard apply to structures that satisfy the brittle fracture provisionsgiven in EN 1993-1-10.(11) The provisions of this Standard apply to structural design under actions that can be treated asquasi-static in nature.(12) In this Standard, it is assumed that both wind loading and bulk solids flow can, in general, betreated as quasi-static actions.(13) Dynamic effects should be taken into account according to the relevant application part of EN1993, including the consequences for fatigue. However, the stress resultants arising from dynamicbehaviour are treated in this part as quasi-static.(14) The provisions in this Standard apply to structures that are constructed in accordance withEN 1090-2.(15) This Standard does not cover the aspects of leakage.(16) This Standard is intended for application to structures within the following limits:design metal temperatures within the range ?50°C to +300°C;radius to thickness ratios within the range 20 to 5000.NOTE: It should be noted that the stress design rules of this standard may be rather conservative ifapplied to some geometries and loading conditions for relatively thick-walled shells.