標準號：SAE AMS 5860F-2006
中文標準名稱：多重熔化的溶液熱處理和沉淀可硬化的耐腐蝕鋼片材帶材和板材12Cr 8.5Ni 0.30Cb 2.0Cu 1.1Ti
英文標準名稱：Steel, Corrosion Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable UNS S45500
標準類型：V11
發布日期：2006/6/1 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：V11
國際標準分類號：49.025.10
引用標準：ASTM A 370-2005;ASTM A 370-2006;ASTM A 480/A 480M-2006;ASTM E 353-1993;SAE AMS 2242F-2001;SAE AMS 2248F-2006;SAE AMS 2300K-2003;SAE AMS 2371G-2003;SAE AMS 2807-1991;SAE ARP 1110B-2006;SAE AS 4194-1991
適用范圍：This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, and plate. These products have been used typically for parts requiring corrosion resistance and high strength in service up to 800 °F (427 °C). The steel can be precipitation hardened to minimum tensile strengths up to 225,000 psi (1551 MPa). Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP 1110 recommends practices to minimize such conditions.