標準號：ISO 4190-5-2006
中文標準名稱：電梯(升降機)安裝.第5部分:控制設備、信號和附加裝置
英文標準名稱：Lift (Elevator) installation - Part 5: Control devices, signals and additional fittings
標準類型：Q78
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：Q78
國際標準分類號：91.140.90
適用范圍：This part of ISO 4190 specifies the control devices, buttons and indicators to be provided when a lift(US: elevator) is constructed and installed, taking into account the type of control intended for the lift and alsoensuring the ease of access for disabled persons (motor and/or sensory). Annex B gives particularrequirements for access. The description of the controls is given only in order to define the buttons andindicators. It does not constitute a complete description of these controls nor does it attempt to standardizethem.This part of ISO 4190 also specifies the requirements for handrails when provided in the car.It is applicable to lifts of classes I to IV and VI as defined in ISO 4190-1 and ISO 4190-2.Group collective lifts have common controls and are electrically interconnected so as to provide a betterservice and for reasons of economy. The system can be more or less complex according to the number of liftsand the expected traffic. Consequently, this part of ISO 4190 does not deal with supplementary signals whichthe manufacturer may consider useful (e.g. “next car”, “stand clear of the doors”).The following are not dealt with in this part of ISO 4190:a) special features (and their corresponding signals), such as certain features for improving the service ofbed lifts, touch screens or voice activators;b) any devices for speeding the traffic in the case of automatic doors (variable time delays according todifferent criteria, closing button, light ray, etc.).The requirements of this part of ISO 4190 are intended to be followed in all cases where the controls and thebasic signals are concerned, and can also be used as a guide in developing supplementary signals.