標準號：ISO 22902-7-2006
中文標準名稱：道路車輛.車用多媒體接口.第7部分:物理規范
英文標準名稱：Road vehicles - Automotive multimedia interface - Part 7: Physical specification
標準類型：T07
發布日期：1999/12/31 12:00:00
實施日期：1999/12/31 12:00:00
中國標準分類號：T07
國際標準分類號：43.040.15
適用范圍：The scope of this part of ISO 22902 is limited to conditions and testing at the equipment level; it does notinclude all conditions and testing necessary for complete verification and validation of the vehicle system.Environmental and reliability testing at lower and higher levels are required to ensure that vehicle quality andreliability objectives are met.It addresses the following requirements relating to the design and manufacture of automotive components andof devices intended to be used in vehicles:- Environment. The conditions in and on a vehicle that a component or device must function within. Theseconditions include chemical, climatic, electromagnetic and mechanical factors and stress.- Power management. The requirements for power supply and delivery from a vehicle to its componentsand the devices used in that vehicle.- Interconnectivity. The requirements for delivering data within a vehicle. These requirements differdepending on the delivery method selected by the automaker or supplier.- Packaging. The standards for locating, securing, protecting, and enclosing or covering components anddevices.- Homologation. An overview of the legal requirements that apply to AMI-C compliant vehicles.- Diagnostic functional requirements. An overview of the sensing and analysis that AMI-C compliantcomponents and devices shall support. This section also recommends characteristics of diagnostic tools.